Flexible-use flat roof mounting system from Altec

German mounting system manufacturer Altec Metalltechnik GmbH presents the »ALTEC FD_OPTIFLEX-10«, a flat roof mounting system that is particularly optimized for flexible use with few different components. The system is designed for penetration-free mounting, i.e. for fixing by ballast alone, the module inclination is 10 degrees. Modules from 990 to 1,140 mm wide and 1,500 to 2,100 mm long can be mounted landscape or portrait.
In order to get by with few components, the supports of the FD_OPTIFLEX-10 are designed in such a way that they can be used equally for east-west or south orientation and that the module clamps can be applied to both the long and the short side of the modules. When clamping on the long side, an additional profile is inserted for support. With the corresponding clamps from Altec, 30 to 40 and 41 to 50 mm module frame heights are compatible.
The system’s profile rails are equipped with an integrated cable duct and are easily transportable with a maximum length of 2.57 meters. For small PV systems, the system is available as a »construction kit« starting at a size of four modules in south orientation or eight modules in east-west orientation.
© PHOTON

Related News